Title
CHLORINE TEST PAPER 10 BOOKS
SKU
RXSOL-60-6604-301
Supply Location::
Locations
[CHLORINE TEST PAPER 10 BOOKS] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[CHLORINE TEST PAPER 10 BOOKS] is available in small packing as well as in bulk. Buy premium quality [CHLORINE TEST PAPER 10 BOOKS] and other lab chemicals from one of the most trusted brands.
Category
Lab Chemical-60
SHORT DESCRIPTION:
PRODUCT REMARK:
TAG IDENFIFICATION:
FIELD NOTE:
This Chlorine Test Paper provides a simple, reliable, and economical means to measure the concentration of chlorine in sanitizing solutions. The Chlorine Test Paper measures total available chlorine from 10-200ppm and gives results in just seconds. Our chlorine test paper is most often used to test the strength of solutions used to sanitize surfaces, for example, in the restaurant industry. In these types of applications, bleach is usually used to generate the available chlorine.
The strip will darken over time, so it is best to compare to the color chart as directed. In addition, if two strips are stuck together, the color will be darker. Lastly, if you lay the strip against the vial when comparing to the color chart, it will also darken the color. The color chart was created by holding a strip in the air next to the vial.
When using bleach as a cleaner, it must be diluted before use, and it will work best in the pH range of 5-7.
Use dry fingers to remove a chlorine test paper strip from the vial.
Dip the test strip into the solution to be tested, and do not agitate.
Remove and compare to the color chart immediately.
Remove and compare to the color chart immediately.When using bleach as a cleaner, it must be diluted before use, and it will work best in the pH range of 5-7.
Use dry fingers to remove a chlorine test paper strip from the vial.
Dip the test strip into the solution to be tested, and do not agitate.
Remove and compare to the color chart immediately.
Doses of chlorine should be sufficient so as to leave a residue of 0.2 mg / l or 0.2 ppm after 10 minutes of the contact period.
Keywords