Title
Aquasol Corrosion Inhibitor RX
SKU
RXSOL-16-4153-025
Supply Location::
Locations
Aquasol Corrosion Inhibitor RX manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Aquasol Corrosion Inhibitor RX at a competitive price from us. We have ready stock of Aquasol Corrosion Inhibitor RX in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Category
Metal Treatment-68
SHORT DESCRIPTION:
PRODUCT REMARK:
TAG IDENFIFICATION:
FIELD NOTE:
Aquasol Corrosion Inhibitor RX protect components from corrosion during transport and storage . This environmentally-friendly product is a substitute for sodium nitrite-based alternatives. Aquasol corrosion inhibitor is added to rinse water for either spray or immersion rinse during cleaning, and provides long term protection against moisture and humidity for ferrous components. Protection may last up to six months, depending on storage conditions, and post-treatment processes such as brazing, bonding, and painting are not affected. The molecular layer of Aquasol Corrosion Inhibitor Rx protection is invisible and non-tacky, and does not affect adhesion. Aquasol Corrosion Inhibitor contains no nitrites or phosphates. It is non-combustible, non-hazardous to the environment, and non bio-accumulating.
Future and Benefit :
- Powerful Provide up to 6 months corrosion protection for Ferrous metals stored in humid conditions.
- Efficient Used at very low concentrations, 2-4% in spray or dip processes.
- Process Compatible Does not adversely effect painting, bonding or adhesion processes after application.
- Residue Free Molecular layer leaves non-tacky finish .
- Simple Disposal Contains no nitrites or phosphates, waste to drain with water.
| Form | Liquid |
| Colur | Brown |
| Odour | Slightly ammoniaical |
| Melting Point | Undetermined |
| Boiling point | 100°C |
| Flashpoint | >100˚C |
| Density (20 °C) | 1,03 g/cm³ |
| Miscibility in water | Fully miscible |
| pH (20°C) |
8 |
A rinse additive in spray or immersion systems to protect ferrous metals against corrosion for up to 6 months. The Vapour Corrosion Inhibitors form an invisible coating on metal surfaces providing protection against moisture and humidity, whilst not affecting adhesion or the properties of post treatment processes such as painting, bonding, brazing.
Used diluted at 2-4% in demineralised water for best results. It is used at temperature 50-60°C by immersion or spray for about 30-60 seconds to ensure good contact over the whole surface. The parts should then be allowed to dry and cool completely before packing or storage.
Keywords