RX Tuff High Foam conc.
Alkaline powerful new generation ship holds cleaning product. Its chemical strength is more superior then AQUAATUFF Ship Hold Cleaner high foam. Very effective emulsifier - based cleaner with high foam for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly react with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low-pressure washing machines.
It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water, also suitable for high-pressure cleaning machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
#ShipHoldCleaningChemical
#CargoHoldCleaner
RXTuff is most powerful alkaline ship hold cleaning chemicals. Its higher concentration always resulting optimum result than other alkaline cleaners. RXTUFF have all chemical properties of Aqautuff but due to the presence of some additional alkaline surfactant its cleaning action and solvency properties sharply increases.
Technically strength of cleaner is directly depended up on the percentage of active ingredients and emulsification power. RX TUFF developed by our team to works and perform as leader in ship hold cleaning chemicals. Our comperative study with AQUAATUFF Ship Hold Cleaner high foam we observed that in many cases RX TUFF perform much better and powerful.
20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.
RXSOL FOAM PLUS – Ship Hold Cleaner
FOAM PLUS Ship Hold Cleaner is a specialized marine cleaning chemical formulated for the effective removal of oil residues, grease, cargo residues, dirt, soot, and general contamination from ship cargo holds, decks, bulkheads, and associated marine surfaces.
Its controlled foaming action helps provide better surface coverage and extended contact time, making it suitable for cleaning large cargo-hold areas where conventional low-foam cleaners may have limited contact with heavily contaminated surfaces.
Key Features
-
Powerful ship hold and cargo hold cleaner
-
Foaming formulation for improved surface coverage
-
Helps remove oil, grease, dirt and cargo residues
-
Suitable for routine and heavy-duty marine cleaning
-
Effective on steel cargo-hold surfaces and other compatible hard surfaces
-
Helps loosen stubborn deposits before washing
-
Suitable for manual application, spray cleaning and foam-cleaning systems
-
Useful for ship maintenance and pre-cargo cleaning operations
Applications
FOAM PLUS can be used for cleaning:
| Application Area | Cleaning Purpose |
|---|---|
| Ship Cargo Holds | Removal of dirt, grease and cargo residues |
| Bulk Carrier Holds | General hold cleaning and preparation |
| Tanker Deck Areas | Oil and grease removal |
| Hatch Covers | Removal of accumulated grime and residues |
| Steel Decks | Degreasing and general cleaning |
| Bulkheads | Removal of dirt and oily contamination |
| Engine Room Areas | Cleaning of oil and grease deposits |
| Marine Equipment | Removal of general industrial contamination |
Typical Cleaning Procedure
-
Remove loose cargo residues and dry debris from the surface.
-
Prepare FOAM PLUS according to the required cleaning strength and the product's technical instructions.
-
Apply the solution by foam applicator, spray, brush or suitable cleaning equipment.
-
Allow adequate contact time so the chemical can penetrate and loosen the contamination.
-
Agitate heavily contaminated areas using a suitable brush or mechanical cleaning equipment.
-
Rinse thoroughly with fresh water or appropriate wash water.
-
Inspect the surface and repeat the treatment where heavy contamination remains.
Suggested Application
The actual dilution should be selected according to the type and severity of contamination, surface condition, temperature and cleaning equipment.
| Contamination Level | Suggested Approach |
|---|---|
| Light contamination | Lower working concentration |
| Medium contamination | Medium working concentration with adequate contact time |
| Heavy oil/grease | Higher working concentration and mechanical agitation |
| Cargo residue | Application strength based on the specific cargo residue |
Note: Exact dosage/dilution should be confirmed from the manufacturer's TDS because the optimum concentration depends on the FOAM PLUS formulation and cleaning conditions.
Suitable for Marine Cleaning Operations
FOAM PLUS Ship Hold Cleaner can be considered for applications involving:
Ship Hold Cleaning • Cargo Hold Cleaning • Deck Cleaning • Hatch Cover Cleaning • Marine Degreasing • Oil Residue Removal • Grease Removal • General Ship Maintenance
Its foaming characteristics can be particularly useful where increased surface contact is required during cleaning operations.
Benefits of Using FOAM PLUS
-
Reduces manual cleaning effort
-
Helps penetrate oily and greasy contamination
-
Provides extended contact on vertical surfaces
-
Suitable for large-area marine cleaning
-
Supports efficient cargo-hold preparation
-
Helps improve the appearance and cleanliness of steel surfaces
Packaging
RXSOL FOAM PLUS can be supplied in suitable industrial packaging such as 5 L, 25 L, 210 L drums and 1000 L IBC, subject to availability and commercial requirements.
Safety & Handling
Always consult the current Safety Data Sheet (SDS) before use. Operators should use appropriate PPE, including protective gloves and eye/face protection. Avoid unnecessary skin and eye contact. Ensure adequate ventilation during application and follow the recommended dilution, handling, storage and disposal instructions.
FOAM PLUS Ship Hold Cleaner Manufacturer & Supplier
FOAM PLUS is a professional marine ship hold cleaning chemical for shipowners, ship managers, ship-management companies, marine contractors, ship chandlers and cargo-hold cleaning service providers. It is suitable for routine vessel maintenance, cargo-hold preparation and heavy-duty marine cleaning operations.
FOAM PLUS Ship Hold Cleaner, Ship Hold Cleaning Chemical, Cargo Hold Cleaner, Marine Hold Cleaner, Ship Cleaning Chemical, Bulk Carrier Hold Cleaner, Cargo Hold Cleaning Chemical, Marine Degreaser, Ship Deck Cleaner, Oil Residue Remover, Ship Maintenance Chemicals.
RX TUFF HIGH FOAM LIQUID - HD (RXSOL-22-3002-HF)
The Importance of RX Tuff by High-Pressure Cleaning
The job of high-pressure cleaning can be done easier & quicker by simply using RX Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the RxTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the RxTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the RxTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RxTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RxTuff incorrect dosages is half the job done.
3 Pieces of Good Advice:
Apply RxTuffon dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce "channels" down the surface, thereby running too fast off the surface. During high-pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff will give the best effect.
Product Description:-RxTuff is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals. It is the low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials.
Applications:-RxTuff Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
Directions for Use and Dose Rates:
General Cleaning:- RxTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination RxTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. The rxtuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.
Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:-
- Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-
- Spray RxTuff on with a high-pressure cleaning machine and use 1:6 with water. If used with the hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
Ship Hold Bulk carrier cleaning detergent.
